NTT docomo FOMA N705i, Instruction Manual

Page: 237 / 518

235
One-Seg
Before Using One-Seg
● View procedure
Register channels for the area and set a list.
“Setting Channels”
→
P.235
■ When a call, etc. arrives while watching
When one of the following arrives while watching or
recording, video and audio are interrupted and each
function activates.
Watching can be resumed after each function is
finished.
• Voice call
• Videophone call
• Alarm, Schedule, To Do, booked program (When
“Alarm setting” is set to “Alarm preferred”)
Setting Channels
<Channel setting>
To use One-Seg, set channels and select a channel
list beforehand. Register a channel list for each area.
Selecting the channel list allows you to watch local
channels.
z
Up to 10 channel lists can be registered, each of
which can contain up to 50 broadcast stations.
z
Receivable channels vary depending on the area.
Registering channel lists
1
i
“1SEG” “Channel setting”
“Select area”
■ To search for channels automatically and
register a channel list
“Auto channel setting” “YES” “YES” Enter
title
To interrupt search, press
o
(Cancel) or
t
then select “YES”.
2
Select area Select prefecture “YES”
N
z
One-Seg programs cannot be viewed if FOMA card
(UIM) is not inserted, subscription to DoCoMo is
canceled, or FOMA service usage is stopped.
z
Even if subscribed FOMA card (UIM) is inserted, One-
Seg may not be activated, e.g. if One-Seg programs
are watched repeatedly out of FOMA range. In this
case, move into FOMA range and retry activation.
z
Do not activate in the following situations when
watching One-Seg programs for the first time:
• Out of FOMA range
• Self mode activating
z
Prolonged One-Seg watching while charging may
shorten battery life.
■
Important
z
When changing models or repairing, stored data
(video clips/pictures recorded with One-Seg, TV link,
data stored in storage area, etc.) cannot be
transferred. Keep a separate record just in case. A
microSD memory card is available to store videos.
Step 1 Channel setting
→
P.235
Register a channel list for each area, then selecting
the channel list.
Step 2 Watching One-Seg Programs
→ P.236
N
z
“Select area” may not work properly depending on the
area. In this case, use “Auto channel setting”.
z
Perform “Auto channel setting” in digital terrestrial
broadcast range where the radio wave can be
received.
z
“Remote control No. duplicated” may appear in “Auto
channel setting”. In this case, select area manually.