NTT docomo FOMA N705i, Instruction Manual

Page: 75 / 518

73 Continued on next page
V
o
ice/Videophone Ca
lls
Setting Remote Monitoring
<Remote monitoring>
Remote monitoring is only available between FOMA
terminals or between a FOMA terminal and a phone
equipped with a 3G-324M-compatible videophone
function. The FOMA N705i can be used as either the
dialing or receiving phone for remote monitoring.
Preparing the receiving phone
Set the phone number of the dialing phone (Other ID)
and the delay until remote monitoring begins (Ringing
time) on the phone performing the remote monitoring
(receiving phone).
z
Up to 5 Other ID can be stored.
1 Videophone settings screen (P.70)
“Remote monitoring” Enter your
security code “Other ID”
The “Other ID screen”
appears.
2 Select an item to store
or change Enter the
phone number of the
monitoring phone
3
Press
t
to return to
the remote monitoring screen
4 “Ringing time” Enter the ring time
(003 to 120 seconds in 3 digits)
The ringing time is set.
5
“Set” “ON”
“ ” appears on the standby screen.
■ To turn remote
monitoring off
“OFF”
6 Position the FOMA terminal
In remote monitoring, the image from the front
camera is sent to the dialing phone.
Put the receiving FOMA terminal on the
monitoring position, ensuring that it is switched
on and unfolded.
If the FOMA terminal is left folded, only the voice
is sent and the camera image is not sent. The
substitute image is sent with “Camera Off”
written on the image.
Other ID screen (P.73)
Look-up address …… Enters the address referring to the
phonebook, Dialed or Received calls records.
Delete this ・ Delete all …… Deletes one or all other ID(s).
When all IDs are deleted, the “Set” setting is set to “OFF”.
Starting/ending the remote monitoring
z
To perform remote monitoring, you should always
make a videophone call with caller ID (phone
number) notification provided from the FOMA
terminal registered as the other ID on the receiving
phone.
1
Make a videophone call to the
receiving phone
After the ringing time set on
the receiving phone has
elapsed, remote monitoring
begins.
The video image from the
receiving phone is displayed
and the sound comes from
the speaker on the dialing
phone.
z
When you have subscribed to either of the Call
Waiting service, Voice Mail Service or Call Forwarding
and you receive a videophone call from an external
device during a voice call, you can answer the call
after ending the current call. When you receive a voice
call, videophone call or 64K data communication
during a videophone call from the external device, you
can answer these calls in the same way.
N
Other ID
Function menu P.73
N
z
When positioning the FOMA terminal, set “Video-
phone” in “Vibrator” to “OFF” to prevent the FOMA
terminal from moving when receiving calls.
z
If the ringing time set for “Voice Mail Service” and “Call
Forwarding” on the receiver side is shorter than the
ringing time set for remote monitoring, “Voice Mail
Service” and “Call forwarding” take priority.
Front
camera
Adjust the angle
Dialing phone