NTT docomo FOMA N705i, Instruction Manual

Page: 490 / 518

37
5
Select the "
ダイヤルアップの電話
番号
" (Phone number for dial-up)
and enter the number of the
access point
You can leave user name and password blank
for mopera U or mopera connection.
To connect to any other provider than mopera U
or mopera, enter the user name and password
specified by the provider or network
administrator in the "
ユーザー名
" (User Name)
and "
パスワード
" (Password) columns as this
screen.
This screen is an example of accessing mopera
U by packet communication.
6
Click "
接続
" (Connect) and then click "
スキップ
" (Skip)
To confirm the settings, cancel a connection test.
7 Click " 接続をセットアップします " (Set up the connection) and then " 閉じ
る " (Close)
8 Open " " → " 接続先 " (Access point)
9
Right-click the icon created for the
dial-up and click "
プロパティ "
(Properties)
10 Confirm the settings on the " 全般 "
(General) tab
If two or more modems are connected to the
PC, confirm that only "
モデム− FOMA N705i"
(Modem - FOMA N705i) is checked in the " 接続
の方法 " (Connection method) column. If not,
check it.
Confirm that "
ダイヤル情報を使う " (Use Dial
Information) is unchecked. If not, uncheck it.