NTT docomo FOMA N705i, Instruction Manual

Page: 353 / 518

351 Continued on next page
Netw
ork Ser
vices
*1: When A or common setting phonebook is set, dialing is made with Number A, and Number B is applied with B
setting phonebook.
*2: The restrictions on the selected function is operated differently depending on the combination of settings as shown
below.
• A mode is for the specified phone number in the A or common setting phonebook.
• B mode is for the specified phone number in the B or common setting phonebook.
• Dual mode is for the specified phone number in all the phonebook.
However, when Restrict dialing is set, you cannot call the phone numbers that are not specified regardless of the
2in1 mode setting.
*3: Gives priority to Secret data when the data is saved as secret.
*4: In B mode, all phonebook entries in microSD memory card are displayed in a list. However the details are not
displayed when 2in1 is set to A mode.
Although mails/SMS are also listed, the details are not displayed if the mail/SMS has been sent to Number A/
Address A.
*5: This function shows names which are checked against the name of data saved in phonebook with each number/
address and converted into that name, when phone numbers on dialing/incoming, numbers on sending/receiving or
addresses on sending/receiving are saved in phonebook.
*6: A is applied when the terminal of the sender does not support 2in1.
*7: The destination address is selectable from B setting phonebook when composing a new mail in Dual mode,
however, please note that the mail is sent from Address A. Note that if you forward a mail to Address B in Dual mode,
the mail is sent from Address A.
*8: Unavailable for each i-
α
ppli standby screen, Mail-connected i-
α
ppli and the i-
α
ppli used with mail functions.
*9: Unavailable for i-
α
ppli standby screen.
Using 2in1
Set 2in1 to ON and perform settings operations.
1
i
“SERVICE” “2in1 setting” Enter
your security code “YES” Select any
item:
■ When 2in1 is set to ON
After entering the security code, 2in1 setting
screen appears without showing the screen to
confirm whether to set 2in1 to ON is not
displayed.
Mode switching
……
Selects the 2in1 mode from “A
mode/B mode/Dual mode”.
“About Modes”
→
P.349
Phonebook 2in1 setting
Phonebook 2in1 setting
……
Highlight the
phonebook entry to set and press
d
(Switch)
to select the mode, then press
o
(Finish).
The mode switches as follows each time you
press
d
(Switch): (A mode)
→
(B
mode) → (Dual mode)
How to search the phonebook
→
P.79
Group 2in1 setting …… Highlight the group to
set and press
d
(Switch) to select the mode,
then press
o
(Finish).
The mode switches as follows each time you
press
d
(Switch): no setting → (Dual
mode) → (A mode) → (B mode)
Stand-by display …… Sets the standby screen
displayed in B mode or Dual mode respectively.
→ P.97
“ ★ ” appears for the changed item. To reset the
setting, press
o
(Release).
Set call/receive No.
Disp. call/receive No. …… Sets to display the
information (name, phone number, mail
address, etc.) of “Number A (Address A)” and
“Number B (Address B)” in different font color
to distinguish when making/receiving a call.
Press
o
(Switch) to switch the color of the
pallet (16 colors or 256 colors).
Press
p
(Reset) to reset to the default setting.
Ringtone for Number B
……
Sets ring tone
(P.90), incoming call screen (P.96), illumination
(P.101), vibration (P.92) and answering
message (P.68) for the incoming voice and
videophone calls, and mails on Number B.
i-
α
ppli All available Available
*8
Available
*9
My Profile Number A and
Address A Number B and
Address B Number A/B
Address A/B
Service A mode B mode Dual mode