NPort Networks N1-9802W, User Manual, Page: 94 / 296

94
Frame Type
Any
EType
ARP
IPv4
IPv4/ICMP
IPv4/UDP
IPv4/TCP
IPv4/Other
IPv6
Indicate the frame type of ACE.Possible value
are:
The ACE will match any frame type
The ACE will match Ethernet Type frames.
Note that an Ethernet Type based ACE will
not get matched by IP and ARP frames.
The ACE will match ARP/RARP frames.
The ACE will match all IPv4 frame.
The ACE will match IPv4 frames with ICMP
protocol.
The ACE will match IPv4 frames with UDP
protocol.
The ACE will match IPv4 frames with TCP
protocol.
The ACE will match IPv4 frames, which are
not ICMP/UDP/TCP
The ACE will match all IPv6 standard frames
Action
[Permit]
[Deny]
Indicates the forwarding action of the ACE
Frames matching the ACE may be forwarded
and learned
Frames matching the ACE are dropped
Rate Limiter Indicates the rate limiter number of the ACE.
The allowed range is 1 to 16. When Disabled
is displayed, the rate limiter operation is
disabled
Port Redirect Indicates the port redirect operation of the
ACE. Frames matching the ACE are
redirected to the port number. The allowed
values are Disabled or a specific port number.
When Disabled is displayed, the port redirect
operation is disabled
Mirror
[Enabled]
[Disabled]
Specifiy the mirror operation of this port,
Frames matching the ACE are mirrored to the
destination mirror port. The allowed values
are:
Frames received on the port are mirrored
Frames received on the port are not mirrored