135
routers taking appropriate actions
depending on the versions of MLD
operating on hosts and routers within a
network. The allowed selection is
“MLD-Auto”, “Forced-MLDv1”, “Forced
MLDv2
”, default compatibility value is
“MLD-auto”
RV
Robustness Variable, the Robustness
Variable allows tuning for the expected
packet loss on a link. The allowed range is
1 to 255, default robustness variable value
is 2.
QI
Query Interval, The Query Interval is the
interval between General Queries sent by
the Querier. The allowed range is 1 to
31744 seconds, default query interval is
125 seconds.
QRI
Query Response Interval. The maximum
Response Delay used to calculate the
Maximum Response Code inserted into the
periodic General Queries. The allowed
range is 0 to 31744 in tenths of seconds,
default query response interval is 100 in
tenths of seconds (10 seconds)
LLQI
Last listener Query Interval. The Last
Listener Query Interval is the Maximum
Response Delay used to calculate the
Maximum Response Code inserted into
Multicast Address Specific Queries sent in
response to Version 1 Multicast Listener
Done messages. It is also the Maximum
Response Delay used to calculate the
Maximum Response Code inserted into
Multicast Address and Source Specific
query message. The allowed range is 0 to
31744 in tenths of seconds, default last
listener query interval is 10 in tenths of
Summary of Contents for N1-9802W
Page 193: ...193 Figure...
Page 284: ...284 Figure...