NPort Networks N1-9802W, User Manual, Page: 231 / 296

231
Security/Network/ACL Status
Each row describes the ACE that is defined. It is a conflict if a
specific ACE is not applied to the hardware due to hardware
limitations. The maximum number of ACE is 256 on each switch.
LOCATION
：
▼
Monitor
▼ Security
▼ Network
￭
ACL Status
PARAMETERS
：
Items Description
User Indicates the ACL user.
Ingress
Port
Indicates the ingress port of the ACE.
Possible values are
：
All
：
The ACE will match all ingress
port.
Port
：
The ACE will match a specific
ingress port.
Frame Type Indicates the frame type of the ACE. Possible
values are
Any
：
The ACE will match any frame type.
EType
：
The ACE will match Ethernet Type
frames. Note that an Ethernet Type
based ACE will not get matched by IP
and ARP frames.
ARP
：
The ACE will match ARP/RARP frames.
IPv4
：
The ACE will match all IPv4 frames.
IPv4/ICMP
：
The ACE will match IPv4 frames
with ICMP protocol.
IPv4/UDP
：
The ACE will match IPv4 frames with
UDP protocol.
IPv4/TCP
：
The ACE will match IPv4 frames with
TCP protocol.
IPv4/Other
：
The ACE will match IPv4 frames,