NPort Networks N1-9802W, User Manual, Page: 149 / 296

149
tagged frame format also includes
priority tagged frames as defined by
IEEE 802.1Q-2003
VLAN ID VLAN identifier (VID) for the port as
defined in IEEE 802.1Q-2003
L2 Priority L2 Priority is the Layer 2 priority to be
used for the specified application type.
L2 Priority may specify on of eight
priority levels (0 through 7), as defined
by IEEE 802.1D-2004. Avalue of 0
represents use the default priority as
defined in IEEE 802.1D-2004
DSCP DSCP value to be used to provide
Diffserv node behaviour for the
specified application type as defined in
IETF RFC2474. DSCP may contain one
of 64 code point values (0 through 63).
A value of 0 represents use of the
default DSCP value as defined in RFC
2475
WEB Interface
A. Click Configuration/LLDP/LLDP-MED
B. Set LLDP-MED Parameters
C. Click Save to apply the setting, Reset to restore
the previous setting.