NPort Networks N1-9802W User Manual Download Page 188

Page: 188 / 296

188

Figure.

GVRP/Global Config

This page allows you to configure the baseic GVRP

Configuration settings all ports.

LOCATION

：

▼

Configuration

▼

GVRP

￭

Global config

PARAMETERS

：

Items

Description

Enable GVRP Check this box to enable GVRP feature.

Join-time

A retransmittion timer for join message. The

acceptable Join-time is 1-20ms, the default is

20ms.

Leave-time

Wait a Leave-time if the switch received an

attribute leave message. After that delete this

attribute if there is no join message for this

attribute. The acceptable Leave-time is

60~300ms, the default is 60ms

Leave All-time After GVRP startup and then the Leave

All-time count-down to 0, the switch will send

Leave All message for all switchs to require

renew all device. The acceptable Leave

All-time is 1000~5000ms, the default is

1000ms.

Max VLANs

Configs the MAX. number of VLANs

supported. This number can only be changed

Summary of Contents for N1-9802W









































































































































































































































































































Search results

Summary of Contents for N1-9802W

Reviews:

NPort Networks N1-9802W, User Manual, Page: 188 / 296

Search results

Summary of Contents for N1-9802W

Reviews: