NPort Networks N1-9802W, User Manual, Page: 85 / 296

85
Allow Guest VLAN
if EAPOL Seen
is set to if a port is moved into the Guest
VLAN It is only changeable if the Guest
VLAN option is globally enabled.
Valid values are in the ramge[1-255]
The switch remebers if an EAPOL frame
has been received on the port for the
life-time of the port. Once the switch
considers whether to enter the Guest
VLAN, it will first check if this option is
enabled or disabled. If disabled
(unchecked;default), the switch will only
enter the Guest VLAN if an EAPOL frame
has ot been received on the port for the
life-time of the port. If enabled(checked),
the switch will consider entering the Guest
VLAN even if an EAPOL frame has been
received on the port for the life-time of the
port.
The value can only be changed if the
Guest VLAN option is globally enabled.
Port Configuration
Port
Admin State
[Force Authorized]
[Force
Unauthorized]
[Port-Based
802.1X]
The port number to which the configuration
below applies
If NAS is globally enabled, this selection
controls the port
’s authentication mode.
The following modes are available:
In this mode, the switch will send one
EAPOL Success frame when the port link
comes up, and any client on the port will be
allowed network access without
authentication
In this mode, the switch will send one
EAPOL failure frame when the port link
comes up, and any client on the port will be
disallowed network access
In the 802.1X-word, the user is called the
supplicant, the switch is the authenticator,