NPort Networks N1-9802W, User Manual, Page: 110 / 296

110
Port Configuration
Port Port identifier
Enable Control whether loop protection is enabled on
this switch port
Action Configure the action performed when a loop
protection is detected on a port. Valid values
are
“Shutdown Port”, “Shutdown Port and
Log
”, or “Log only”
Tx mode Control whether the port is actively
generating loop protection PDU
’s, or whether
it is just passively looking for looped PDU
’s
WEB Interface
To Configure the Loop Protection
：
A. Click Configuration/Loop Protection
B. Enable Loop Protection, configure Transmission
Time and Shutdown Time
C. Specify reaction for each port when loop
protection is detected
D. Click Save to apply the setting or Reset to restore
the previous setting.
Figure