NPort Networks N1-9802W, User Manual, Page: 60 / 296

60
Figure
Security/Switch/SNMP/System
Using the SNMP System Configuration page to configure
SNMP settings, Community name, trap host and public
traps as well as the throttle of SNMP, A SNMP manager
must pass the authentication by identifying both
community names, then it can access the MIB information
of the switch. So, both parties must have the same
community name.
LOCATION
：
▼
Configuration
▼ Security
▼ Switch
▼ SNMP
￭
System
PARAMETERS
：
Items Description
SNMP System Configuration
Mode Enables or disables SNMP service
Version Specifies the SNMP version
(SNMP v1, SNMP v2c, SNMP v3)
Read Community The community for Read access
Write Community The community for Read/Write access
Engine ID The SNMP v3 Engine ID,It is only
available for SNMP v3 (10-64 HEX
digits, excluding a string of all 0
’s or
F
’s)