NPort Networks N1-9802W, User Manual, Page: 63 / 296

63
Items Description
SNMP Trap Configuration
Trap Config Name Enter a configuration name
Trap Mode Enables or disables SNMP traps
Trap Version Specifies the Trap Version
(SNMP v1, SNMP v2c, SNMP v3)
Trap Community Specifies the community string for
SNMP trap packets
Trap Destination
Address
Specifies the IP Address of
management PC/NB to get trap
packets
Trap Destination
Port
Specifies the trap destination port
Trap Inform Mode Enable or disable trap inform mode
operation
Trap Inform
Timeout(sec)
Enter a time for the trap inform timeout.
The allowed range is 0 to 2147.
Trap Inform Retry
Times
Enter a number for the trap inform retry
times. The allowed range is 0 to 255.
Trap Probe Security
Engine ID
Enable or disable SNMP trap probe
security engine ID mode.
Trap Security
Engine ID
Enter a unique ID for SNMPv3 to send
traps and informs using USM for
authentication and privacy.
Trap Security Name Enter the name for the trap security.
Trap Authentication
Failure
Issues a notification message to
specified IP trap managers whenever
of a SNMP request fails.
Trap Link-up and
Link-down
Issues a notification message to
specified IP trap managers whenever
a port link is established or broken
Trap Inform Mode Enables or disables sending
notification as inform message.
It is only available for SNMP v2c and
SNMP v3.
Inform mode can guarantee the
message is received.