NPort Networks N1-9802W, User Manual, Page: 108 / 296

108
PARAMETERS
：
Items Description
Port Port Identifier
LACP Enabled Controls whether LACP is enabled on this
switch port. LACP will from an aggregation
when 2 or more ports are connected to the
same partner. LACP can from max 12 LLAGs
per switch and GLAGs per stack.
Key
The Key value incurred by the port.(Range
：
1-65535). The
“Auto” setting will set the key
as appropriate by the physical link speed,
10Mb=1, 100Mb=2, 1Gb=3. Using the
specific setting, a user-defined value can be
entered. The same key setting ports can
participate in the same aggregation group.
Role
Timeout
Prio
The Role shows the LACP activity status. The
“Active” will transmit LACP packets each
second, while
“Passive” will wait for a LACP
packet from a partner.
The Timeout controls the period between
BPDU transmissions. Fast Will transmit LACP
packets each seconds, while Slow will wait for
30 seconds before sending a LACP Packet.
The Prio controls the priority of the port. If the
LACP partner wants to form a larger group
than is supported by this device then this
parameter will control which ports will be
active and which ports will be in a backup
role. Lower number means greater priority.
WEB Interface
A. Click Configuration/AggregationLACP
B. Enable LACP on all of the ports in an LAG
C. Divide the LAG by different key
D. Set one Active role port in one LAG at least
E. Click Save to apply the setting or Reset to restore
the previous setting.