NPort Networks N1-9802W, User Manual, Page: 90 / 296

90
PARAMETERS
：
Items Description
Port The logical port for the settings contained
in the same row
Policy ID Specify the Policy ID to apply th this port
(Range
：
0-255)
Action Permit or deny the forwarding if policy is
Matched(Default is
“Permit”
Rate limiter ID Specify a Rate Limiter ID, the mapping
table is in
“Rate Limiters”
page.(Range:1-16, default is
“Disabled”)
Port Redirect Select which port frames are redirected on.
The allowed values are
“Disabled” or
specific port number and it can
’t be set
when action is permitted. The default value
is
“Disabled”
Mirror
[Enabled]
[Disabled]
Specify the logging operation of this port.
The allowed values are:
Frames received on the port are mirrored.
Frames received on the port are not
mirrored.
The default value is
“Disabled”
Logging
[Enabled]
[Disabled]
Specify the logging operation of this port.
The allowed values are;
Frames received on the port are store in
the System log.
Frames received on the port are not logged
Shutdown
[Enabled]
[Disabled]
State
[Enable]
Specify the logging operation of this port.
The allowed values are:
If a frame is received on the port. The port
will be disabled.
Port shut down is disabled
The default value is
“Disabled”
Specify the port state of this port. The
allowed values are:
To reopen ports by changing the volatile
port configuration of the ACL user module.