NPort Networks N1-9802W, User Manual, Page: 182 / 296

182
PARAMETERS
：
Items Description
QCE# Indicate the index of QCE.
Port Indicates the list of ports configured with the
QCE.
Frame Type Indicates the type of frame to look for
incomming frames. Possible frame types are
：
Any:
：
The QCE will match all frame type.
Ethernet:
：
Only Ethernet frames (with Ether
Type 0x600-0xFFFF) are allowed.
LLC
：
Only (LLC) frames are allowed.
SNAP
：
Only (SNAP) frames are allowed.
IPv4
：
The QCE will match only IPV4 frames.
IPv6
：
The QCE will match only IPV6 frames
SMAC Display the OUI field of Source MAC address,
i.e. first three octet (byte) of MAC address.
DMAC Specify the type of Destination MAC
addresses for incoming frame.
Possible values are
：
Any
：
All types of Destination MAC addresses
are allowed.
Unicast
：
Only Unicast MAC addresses are
allowed.
Multicast
：
Only Multicast MAC addresses are
allowed.
Broadcast
：
Only Broadcast MAC addresses
are allowedd.
The default value is 'Any'.
VID Indicates (VLAN ID), either a specific VID or
range of VIDs. VID can be in the range
1-4095 or 'Any'
PCP Priority Code Point: Valid value PCP are
specific(0, 1, 2, 3, 4, 5, 6, 7) or
range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
DEI Drop Eligible Indicator: Valid value of DEI can
be any of values between 0, 1 or 'Any'.