NovoPort® IV
57
4.9.2
Menu 1: Programming the start function for the hand transmitter
Fig. 4-7
Programming the start function for the hand transmitter
1.
Briefly press the programming button (PROG button) (D). The display
shows “1”.
2.
When the display flashes, press the hand transmitter button with which you will
later start the drive until the digital point (A1) on the display flashes 4 times.
3.
As soon as the light goes out, you can set the next hand transmitter (see
step 1).
4.9.3
Menu 2: Programming the light function for the hand transmitter
Fig. 4-8
Programming the light function for the hand transmitter
1.
Briefly press the programming button (PROG button) (D) twice. The display
shows “2”.
2.
Press the button on the hand-held transmitter to control the light until the digital
point (A1) flashes 4 times.
3.
As soon as the light goes out, you can set the next hand transmitter (see
step 1).
C
B
D
A1
C
B
D
A1
