66
NovoPort® IV
During adjustments to the garage door, or during power failure, the garage door can
be manually opened or closed.
1.
Pull the ball handle to permanently disengage the operator.
“8” is shown on the display of the control unit.
The garage door can now be moved manually.
Fig. 5-1
Disengaging the operator
The motor head can re-engage at any point.
2.
Push the lever on the motor head down to engage the operator again.
Fig. 5-2
Engaging the operator
5.4
Opening or closing the garage door (other operation modes)
•
Possible operating modes see chapter Special settings, page 60.
NOTICE
When installing the system, locking elements of the garage door
operator are dismantled.
These should be reinstalled if the garage door has to be operated
manually over a longer period of time. This way the garage door can
be locked when closed.
