62
NovoPort® IV
4.10.4 Menu 8: Door adjustments
1.
Select menu item “8”.
After approximately 2 seconds, the display flashes and the set value appears.
The factory setting is “4”.
2.
If desired, adjust the setting with the aid of the OPEN (B) and CLOSE (C)
buttons.
4.10.5 Menu 9: Setting other operating modes
1.
Select menu item “9”.
After approximately 2 seconds, the display flashes and shows the set value of
the operating mode. The factory setting is “0”.
2.
If desired, adjust the setting with the aid of the OPEN (B) and CLOSE (C)
buttons.
NOTICE
After the setting was changed, the force learning cycle must be
repeated.
Value
Start OPEN
Stop OPEN
Start CLOSE
Stop CLOSE
0
0
0
0
0
1
15
0
15
0
2
0
15
0
60
3
15
15
15
35
4
25
40
25
40
5
15
15
15
55
6
15
15
15
15
7
15
15
65
50
8
55
15
15
105
9
soft run mode only
Remarks:
These figures represent the soft run distances in cm measured at the carriage.
