NovoPort® IV
47
3.3
Rating plate
The rating plate is located under the cover of the control unit, see fig. 4-4, page 52.
Observe the power supply specifications.
3.4
Control elements
Fig. 3-2
Control elements
3.5
Functioning of the integrated safety unit
If the garage door encounters an obstruction during closing, the operator stops and
releases the obstruction by opening the door to the upper limit position, see chapter
Force learning cycle, page 59.
If the door operator is in soft run mode, the door will only open slightly to release the
obstruction while still preventing persons from looking into the garage.
If the garage door encounters an obstruction during opening, the operator stops and
moves back a little to release the obstruction. The door can be closed again by
pulsing.
A. Numerical display (A1 digital point)
B. OPEN / Start button
C. CLOSE button
D. Program button (PROG button)
1. Control unit
3. Hand transmitter
A
C
B
A1
D
3
1
