![background image](http://html1.mh-extra.com/html/nova-technology-international-llc/standard-profile-truck-lock-series/standard-profile-truck-lock-series_owner-and-user-manual_1710473067.webp)
65
Manual No. NT-0-350 - Rev. May 2021
NOVA Truck Lock
™
Standard Profile Manual
TROUBLESHOOTING
Display Information
—
Total Cycles
This display shows the number of complete cycles the product has gone through. One cycle is defined as
the Ram bar moving from the unlocked position to the locked position and back to the unlocked position.
Display Information
—
Cycles 2 Service
This display shows how many cycles the Truck Lock™ can go through before service is needed for the
items on the list below:
CB-10
ITEM NO. PART
NUMBER
DESCRIPTION
QTY
1
CB-1004
12 AMP RELAY
1
CB-11
ITEM NO. PART
NUMBER
DESCRIPTION
QTY
1
CB-1004
12 AMP RELAY
1
2
CB-1005
20 AMP RELAY
1
Display Information
—
12345678 Inputs
This display shows all inputs going to the control box. The number zero (0) means the input is off. The
number one (1) means the input is on. All inputs are listed below:
1. LS1
5. N/A
2. LS2
6. N/A
3. LS3 (OPTIONAL)
7. N/A
4. LS4 (CB-11 ONLY)
8. N/A
Display Information
—
12345678 Outputs
This display shows all outputs coming from the control box. The number zero (0) means the output is
off. The number one (1) means the output is on. All outputs are listed below:
1.
Control Box
—
Red Light
5. Solenoid 1
—
Lock
2.
Control Box
—
Green Light
6. Solenoid 2
—
Unlock
3. Outside
—
Red Light
7. Alarm Horn
4. Outside
—
Green Light
8. Interlocked equipment active
(CB-11 ONLY)
Display Information
—
Enter New Over-Ride Password:
This display is for changing the password to get into HORN OVER-RIDE. Once on this screen, press
“ENTER” to change current password. Then enter new password. The new password can range from 1
to 9999. Once new password has been typed, press “ENTER” to successful change the password. Any
leading zeros will be eliminated. Provide the new over-ride password to authorize dock attendant(s).
3. Exiting Maintenance Mode On The Control Box
Key Point: This procedure can be done on any maintenance display.
a. Depress the “HORN OVER-RIDE” button (#0 button).
b.
The RED light, on the control box, will start flashing if the GREEN light was flashing or remain a constant
RED. This is normal to notify the end user that they are about to enter a new mode.
c. Enter the Maintenance code, 28252, and then press “ENTER”.
Key Point: The current HORN OVER-RIDE code will also work for exiting Maintenance Mode.
i. If the wrong code was entered, the “Wrong PW: Reenter Or wait” display will appear. On this display,
repeat steps 3a through 3c to enter maintenance mode.
ii. Or if no further input is completed within 30 seconds, the “Wrong PW: Reenter Or wait” display will clear
and the screen will return to last display prior to entering maintenance mode.
Summary of Contents for Standard Profile Truck Lock Series
Page 2: ......