background image

H0682600_REVB

FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and qualified in pool 

equipment by the jurisdiction in which the product will be installed where such state or local requirements exist. The main-

tainer must be a professional with sufficient experience in pool equipment installation and maintenance so that all of the 

instructions in this manual can be followed exactly. Before installing this product, read and follow all warning notices and 
instructions that accompany this product. Failure to follow warning notices and instructions may result in property damage, 
personal injury, or death. Improper installation and/or operation will void the warranty.

Improper installation and/or operation can create unwanted electrical hazard which can cause serious injury, property 
damage, or death. 

ATTENTION INSTALLER - This manual contains important information about the installation, operation and safe use of this 
product. This information should be given to the owner/operator of this equipment.

 

WARNING

INSTALLATION & 

OPERATION MANUAL

Power

Alert

!

JAUTPS/JAUTP

JACUZZI 

POOL ONLY & POOL/

SPA COMBINATION 

AUTOMATION SYSTEM

Summary of Contents for JAUTPS





























Reviews: