![background image](http://html1.mh-extra.com/html/nova-technology-international-llc/standard-profile-truck-lock-series/standard-profile-truck-lock-series_owner-and-user-manual_1710473019.webp)
17
Manual No. NT-0-350 - Rev. May 2021
NOVA Truck Lock
™
Standard Profile Manual
INSTALLATION INSTRUCTIONS
BLACK WIRE FROM LIGHT BOX
RED WIRE
FROM LIGHT BOX
RED WIRE FROM LIGHT BOX
(MARKED WITH "GREEN LIGHT" TAG)
DIN RAIL
CIRCUIT BREAKER
POWER SUPPLY
BLACK WIRE FROM
OPTIONAL RIG SENSOR
WHITE WIRE FROM
OPTIONAL RIG SENSOR
FIGURE W
—
WIRING CB-12 CONTROL BOX
Step 16M:
Insert plug into wall receptacle or hard
wire per local codes.
NOTICE
Fifteen (15) NOVA Truck Lock
™
control boxes
can be connected to one (1) 15 amp branch
circuit breaker per 1999 National Electric Code,
assuming no other loads on circuit.
Step 17M:
Connect the (2) three-wire electrical
cables from the control box to the limit switches, one
mounted on the cover and the other mounted on the
top of the slide pole. See Figure X.
INSIDE OF CONSOLE COVER
LIMIT SWITCH 1
SLIDE POLE
LIMIT SWITCH 2
FIGURE X
—
CONNECTING LIMIT SWITCHES
Step 18M:
Replace cover on control console and
secure with (4) 3/8”x1/2” bolts and star lock washers.
Slide plastic grip on to activation handle. See Figure Y.
NOTICE
Secure wires from the control box out of the
way from getting tangled in activation handle, or
counterweight assembly once console cover is
replaced.
ACTIVATION HANDLE
PLASTIC GRIP
CONTROL
CONSOLE
COVER
3/8"X1/2" HH BOLT
STAR
LOCK
WASHER
FIGURE Y
—
REPLACE CONTROL CONSOLE COVER
CAUTION
CAUTION
All electrical work
—
including the installation
of the disconnect panel, control panel, and final
connections to the pit junction box
—
must be
performed by a certified electrician and conform
to all local and applicable national codes.
Summary of Contents for Standard Profile Truck Lock Series
Page 2: ......