55
Manual No. NT-0-350 - Rev. May 2021
NOVA Truck Lock
™
Standard Profile Manual
• If the control box is not interlocked, skip step “a” below:
• If the control box is interlocked, perform step “a” below:
FIGURE CX
—
RESTRAINING
2P. RESTRAINING (With RIG Sensor)
a. Interlocked equipment must be in position listed below:
PLC Display: Interlock Door A
Door must be closed
OR
PLC Display: Interlock Door B
Door could be opened or closed
OR
PLC Display: InterlockLeveler
Leveler must be store
b. Depress “RESTRAIN” (#1 button).
c.
The RED light on the control box is flashing, alerting fork truck driver an unsafe condition exists.
d.
The outside RED light is flashing, alerting transport vehicle driver not to move.
e. The HORN will sound while the Ram bar transitions from RELEASED position to RESTRAIN position to
securely capture the RIG.
f.
If HORN continues to sound after the Ram bar is finished transitioning, proceed to FAULT, otherwise
proceed to LOCKED.
FIGURE CW
—
RESTRAIN OPERATION
OPERATING PROCEDURES
CAUTION
CAUTION
If trailer can not be captured due to a lift gate or
other obstruction that could become damaged,
proceed to
horn over-ride state.
RED LIGHT
FLASHING
Summary of Contents for Standard Profile Truck Lock Series
Page 2: ......