18
Manual No. NT-0-350 - Rev. May 2021
NOVA Truck Lock
™
Standard Profile Manual
INSTALLATION INSTRUCTIONS
Step 19M:
Move activation handle down into
“RESTRAIN” position which will raise restraint ram
outside. Adjust ram height by turning nut on lower
pulley assembly. See Figure Z.
LOWER PULLEY SWIVEL
BRACKET ASSEMBLY
ADJUST NUT
FIGURE Z
—
ADJUSTMENT ON LOWER PULLEY SWIVEL
BRACKET
Step 20M:
Tighten cable until entire guide height
hole is showing. See Figure AA.
ENTIRE GUIDE HEIGHT
HOLE IN RAM BAR IS
VISIBLE
RAM BAR
FIGURE AA
—
GUIDE HEIGHT HOLE SHOWN
NOTICE
Visually check to ensure Ram bar is at correct
height after adjustments are made.
CAUTION
CAUTION
Concrete must be cured prior to performing Step
19M. If concrete has not cured, the cable tension
of Step 19M will cause the Truck Lock™ to move
out of position.
Summary of Contents for Standard Profile Truck Lock Series
Page 2: ......