26
Manual No. NT-0-350 - Rev. May 2021
NOVA Truck Lock
™
Standard Profile Manual
FIGURE AM
—
CIRCUIT BREAKER
1. Power-Up
a. Unlatch plastic clip on the right side of the control box holding the cover on.
b. Open the cover of the control box.
c.
Turn on the circuit breaker by flipping switch upward.
d. Close the control box door.
e. Re-latch the plastic clip to secure the door.
f.
Remove protective film from PLC display.
g.
Verify PLC screen shows “Truck Lock” as shown in figure AN. (If it does not show “Truck Lock” call
NOVA)
h.
Verify the RED light on the control box is flashing.
i.
Verify the outside GREEN light is flashing.
INSTALLATION INSTRUCTIONS
TEST OPERATION
This test operation is specifically for the installation instructions to verify the NOVA Truck Lock™ is working properly.
If the NOVA Truck Lock™ does not work properly, contact Nova Technology.
FIGURE AN
—
VERIFY PLC SCREEN
FIGURE AO
—
RELEASED POSITION / NO VEHICLE PRESENT
Note: Flange model restraint is shown for representation in Test Operation. Actual restraint may differ.
RED LIGHT
FLASHING
Summary of Contents for Standard Profile Truck Lock Series
Page 2: ......
