![background image](http://html1.mh-extra.com/html/nova-technology-international-llc/standard-profile-truck-lock-series/standard-profile-truck-lock-series_owner-and-user-manual_1710473023.webp)
21
Manual No. NT-0-350 - Rev. May 2021
NOVA Truck Lock
™
Standard Profile Manual
INSTALLATION INSTRUCTIONS
If the control box is not a CB-11-A or B or C, skip to step 16.
If the control box is a CB-11-C see next page.
If the control box is a CB-11-A or B perform steps below:
TB1-7B (LS4)
TB1-8B (-V)
TB1-9B (IRA)
TB1-10B (IRB)
A
C
B
COM
SAME WIRING AS
PREVIOUS FIGURE
N.O.
N.C.
TB1 (FOUND INSIDE OF CONTROL BOX)
DOOR LIMIT
SWITCH EXAMPLE
(SUPPLIED BY OTHERS)
DOOR LOGIC BOARD EXAMPLE
(SUPPLIED BY OTHERS)
ONLY NEEDED
FOR CB-11-A
FIGURE AG
—
CONTROL BOX TB1 INTERLOCKED DOOR WIRING SCHEMATIC (CB-11-A & CB-11-B)
• Disclosure:
• Door logic board example may vary. Reference door operator owner’s manual before installation.
• For example above, remove jumper from 2 and 3, and run wires from IRA to 2 and IRB to 3 on DOOR
LOGIC BOARD EXAMPLE.
• Door limit switch example may vary. Limit switch should be installed in door operator electrical box. Do not
splice or cut existing limit switch wires. Reference door operator owner’s manual before installing.
Summary of Contents for Standard Profile Truck Lock Series
Page 2: ......