Worksheets for the Quick-Start Procedure
306308-A Rev 00
B-11
Enter decimal value in seconds for Poll
Interval [120]:
(For NBMA only)
Enter the largest number of
seconds allowed between Hello
packets that the router sends to an
inactive NBMA neighbor.
The router suggests a 120-second
interval.
Enter IP address of neighbor in dotted
decimal notation or enter q to quit:
(For NBMA only)
Enter addresses for all NBMA
neighbors that you want the router
to communicate with.
When you finish entering
addresses, enter q.
Enter IP address of neighbor in dotted
decimal notation:
(For PPP only)
Enter addresses for the PPP
neighbors that you want the router
to communicate with.
Static Route to Site Manager Worksheet
Requested Information
Options
Your Response
Destination Network [0.0.0.0]:
Enter the gateway address of the
destination network. An address
of 0.0.0.0 specifies the default
route.
Destination Network Mask [0.0.0.0]:
Enter the subnet mask of the
destination network. A mask of
0.0.0.0 specifies the default
route.
Next-Hop Address:
Enter a next-hop address. All
static routes require a next-hop
address in the same subnet as
the initial IP interface.
(continued)
OSPF Worksheet
(continued)
Requested Information
Options
Your Response