Nortel DualMode 800, Maintenance Manual

Page: 26 / 216

1-12 Equipment operation Nortel Networks Confidential
411-2051-500 Draft 00.01 November 1999
Programming the mobile
To activate the Hughes M6200 mobile, you need to program:
• the four Numerical Assignment Modules (NAMs)
• Due to NAM4's scanning control of paging channels, it must be
programmed when the M6200 mobile is used in the DCSM.
• System selection
Programming the NAM parameters
For the M6200 cellular telephone, the NAMs are stored in the mobile and
need to be programmed when the DCSM is installed in the cell site.
The NAM parameters that can be programmed are:
• Area Code
• Phone Number
• Access Overload Class (ACCOLC)
• Primary 1st Paging Channel (1STCHP1)
• Secondary 1st Paging Channel (1STCHP2)
• System ID (SID)
• Extended System ID (Ex SID1-8)
• Unlock
• Security Code (Secure)
• Digital Indicator (Dig Ind)
• Sticky Analog (StickyA)
• BillBoard1 (NAMs 1 to 3 only)
• BillBoard2 (NAMs 1 to 3 only)
Note: NAM 4 includes five additional programming fields:
— Scn DCCH
— # DCSS
— 1STCHA1
CAUTION
Failure to program the DCSM mobile unit as described, or
attempting to program the DCSM mobile unit as a regular
M6200 mobile will result in the malfunction of the DCSM.