Nortel DualMode 800, Maintenance Manual

Page: 25 / 216

Nortel Networks Confidential DualMode Cell Site Monitor (DCSM) 1-11
Wireless Solutions DualMode 800 Enclosure Maintenance Manual MTX08
Controls and keypad description
Display Provides the following information:
Signal Strength—bars on the upper left of the
display indicate the signal strength of your phone
when it is on. Three full bars signifies highest
strength.
InUse—indicates a call is in progress.
Roam—when on or flashing, indicates that the
phone is outside the home service area as
determined by Sys ID.
NoSvc—indicates that the signal strength is not
strong enough to allow a call to be initiated or
received.
Digital— indicates that the current call is in digital
mode.
Up/Down Volume Adjusts the keypad, speaker and earpiece sound
Control keys level. This key is also used to scroll through the
parameters of the NAMs and other menus.
0-9 Digit keys Used for entering telephone numbers.
SND (Send) key Originate/answer calls.
PWR (Power) key The function of this key has been disabled. The
mobile/DCSM cannot be turned off by this key.
END key Ends calls.
RCL (Recall) key Recalls numbers stored in memory.
CLR (Clear) key Clears the display or allows you to exit from any
menu.
STO (Store) key Stores information in memory and confirms your
selections.
One-Touch Dial keys Numbers stored in either of these keys can be
(M1 and M2) dialed by simply pressing the appropriate key.
FCN (Function) key When used with other keys, personalizes your
phone.