Nortel DualMode 800, Maintenance Manual

Page: 58 / 216

1-44 Equipment operation Nortel Networks Confidential
411-2051-500 Draft 00.01 November 1999
3. Turn on the power to the computer and the MCPA shelf.
4. Start the ‘Nortel gain’ program from the Start menu on the computer. The
selection menu for the MCPA will pop out (see Figure 1-10). Select the
100W MCPA system.
Figure 1-10
Selection menu for the MCPA
5. The power setting menu for the MCPA will pop out (see Figure 1-11).
Figure 1-11
Power setting menu for the MCPA
6. Click on the Comm Port parameter on the menu. Set the Comm Port
(COMM1, 2, 3, or 4) parameter to match the physically-connected serial
communications port on the computer.
Note: To verify communications between the computer and the MCPA
shelf, check for a temperature reading on the menu. If there is no
temperature reading, the Comm Port parameter may not match the
Powerwave/Nortel Model NTFC07BB
X
50W MCPA
System
100W MCPA
System
Exit
Universal Enclosure System
X
File CommPort Download About
Temperature 35.652 C
Current output power 59.89 Watts
Maximum available 100 Watts
output power
Watts
Target output power per channel 2.5
Channels
Number of channels 24
Firmware Version 2.1 10:22 AM
Start Initalization Shipping parameter
Program Gain Initalization
Status