Nortel CallPilot 702t, Installation And Configuration Manual

Page: 88 / 306

Using CallPilot Manager to monitor hardware Standard 1.0
88 CallPilot
5 Scroll down to the Maintenance section.
The following is an example of the Maintenance section for an MPC-8
card:
6 Click Courtesy Stop, Stop, or Start, as required.
Button Description
Start If the selected component is out of service, click this
button to put it into service.
Courtesy
Stop Click this button to take the selected component out of
service. CallPilot waits for the call to be completed
before disabling the component.
ATTENTION
If you are courtesy stopping all components (that is, you
are taking the entire system down), ensure that you
inform all administrators, desktop messaging users, and
web messaging users so that they can log off their
sessions before you proceed.
The system asks you to confirm the Courtesy stop. If you
click OK, the component is put out of service after all
calls are finished.
Stop Click this button to take the selected component out of
service immediately. All calls that are in progress are
disconnected immediately.
ATTENTION
If you are stopping all components (that is, you are
taking the entire system down), ensure that you inform
all administrators, desktop messaging users, and web
messaging users so that they can log off their sessions
before you proceed.