Nortel CallPilot 702t, Installation And Configuration Manual

Page: 166 / 306

Performing RAID maintenance Standard 1.0
166 CallPilot
27 Select Yes.
Note: You may be warned that you are combining two drives of different
sizes. If this happens, you must ensure that you are using hard drives
that are qualified by Nortel Networks for CallPilot.
Result: The Logical Drive Definition window appears.
Note: The preceding window does not reflect a valid CallPilot
configuration.
28 Ensure that the RAID Level is 1, and that the Write Cache option is set to
Thru (the default).
Note: If these settings differ, you can change them using the +/- keys
when the option is highlighted.
29 To add the logical drive, press Tab to switch the focus to the buttons, and
then press Enter with Add Drive selected.
Repeat these steps until all logical drives are defined.
30 When all logical drives are defined, apply the configuration to the
controller by selecting and pressing Apply.
Result: The System Packs are defined, and the configuration is written
to the controller NVRAM.
Note: No drive initialization is necessary if the drives have not been
used.
31 Allow the above process to complete, and then press Esc multiple times
until the Exit confirmation window appears.