Chapter 4 Installing option cards and DIMMs
63
Installing the Contivity 1700
10
If the Contivity 1700 is installed in an equipment rack, mount it in the rack.
a
Set the Contivity 1700 on the rack-mount shelf in the rack.
b
Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack and tighten the screws.
11
Replace the front bezel
(Figure 23)
.
a
Hold the bezel by its two handles and push it onto the chassis.
b
Using a screwdriver, tighten the 2 screws to secure the bezel to the
chassis.
Figure 23
Replacing the front bezel
CS160015A
Press here
Summary of Contents for 1700
