Chapter 1 Installing the Contivity 1700 chassis
25
Installing the Contivity 1700
Figure 3
Attaching the cage nuts to the rack
2
Position the rack-mount shelf inside the rack as shown in
Figure 4
.
3
Align the holes in the shelf with holes in the front of the rack.
Figure 4
Installing the shelf in the equipment rack
4
Make sure that the support flange snaps into place
(Figure 4)
.
5
Insert one of the supplied panhead screws through the top hole on each side of
the shelf into the hole in the rack and tighten the screw
(Figure 4)
.
CS260003A
Cage nut
Rail
without
threaded
holes
CS260003A
Flange
Rack edge
Summary of Contents for 1700
