26
Chapter 1 Installing the Contivity 1700 chassis
314711-D Rev 00
Mounting the chassis in the equipment rack
Nortel Networks recommends that two people install the chassis in the rack.
To install the Contivity 1700 in the equipment rack:
1
Set the Contivity 1700 on the rack-mount shelf.
2
Remove the front bezel from the Contivity 1700
(Figure 5)
.
a
Using the Phillips screwdriver, turn each of the 2 screws on the front bezel
a quarter turn counterclockwise.
Figure 5
Removing the front bezel
b
Grip the two handles and firmly pull the bezel toward you to unsnap it
from the chassis.
The first few times that you remove the front bezel, it may be somewhat
difficult to remove because the ball studs and socket clips are new.
Caution:
Do not use the piece with the Nortel Networks logo and the
LEDs as a handle.
CS160014A
Summary of Contents for 1700
