Chapter 1 Installing the Contivity 1700 chassis
23
Installing the Contivity 1700
Installing the chassis
To install the Contivity 1700, do one of the following:
•
Position the chassis on a flat, sturdy, horizontal surface.
•
Mount the chassis in a standard equipment rack (see
“Installing the chassis in
an equipment rack” on page 24
).
Installing the chassis on a flat surface
If you decide to place the Contivity 1700 on a flat surface, make sure that the
surface is large enough for the gateway and sturdy enough to support the
combined weight of the Contivity 1700 and the cables that you attach to it.
The Contivity 1700 accessory kit includes four rubber feet that can be attached to
the bottom of the gateway.
Figure 2
shows the placement of these rubber feet.
Figure 2
Placement of rubber feet on the bottom of the chassis
CS160016A
Attach feet (4)
Summary of Contents for 1700
