Appendix A Technical specifications
69
Installing the Contivity 1700
Table 14
provides the 10/100BASE Ethernet port pinouts.
Serial port
The system board provides a serial port on the rear of the chassis to enable
out-of-band management. Using the serial port, you can assign the management
IP address and subnet mask to the newly installed gateway (for more information,
see
Chapter 3, “Configuring the management IP interface,” on page 43
).
The serial cable provided with the Contivity 1700 is a DB9/DB25-to-DB9/DB25
cable. This cable provides a crossover connection (transmit-to-receive and
receive-to-transmit). The DB9 connector goes into the gateway and the other DB9
or DB25 connector goes into your workstation.
Table 15
provides the multiple DB9/DB25 serial interface cable pinouts.
Table 14
10/100BASE Ethernet port pinouts
Pin
Description
1
RD +
2
RD -
3
TD +
6
TD -
Table 15
Multiple DB9 and DB25 connector pinouts
Serial port
DB9 connector
Serial port
DB25 connector
Serial port
DB25 connector
Serial port
DB9 connector
Pinout
Signal
Pinout
Signal
Pinout
Signal
Pinout
Signal
2
RXD
3
TXD
>
2
RXD
3
TXD
3
TXD
2
RXD
>
3
TXD
2
RXD
4
DTR
20
DSR
>
6
DTR
6
DSR
5
Ground
7
Ground
>
7
Ground
5
Ground
6
DSR
6
DTR
>
20
DSR
4
DTR
7
RTS
4
RTS
>
5
CTS
8
CTS
8
CTS
5
CTS
>
4
RTS
7
RTS
Summary of Contents for 1700
