66 Copying settings
Copying settings
Programmed settings for lines, telephones, and certain
Capabilities can be copied to other lines or telephones. many
lines or telephones require the same settings, program one line
or telephone, and then copy those settings.
L i n e p r o g r a m m i n g
Line programming can be copied for Line abilities in the
Capabilities section of Administration programming, and Ringing
telephones in the Service Modes section of Administration
p r o g r a m m i n g .
Use the
display button and the dial pad to identify the
source and destination of the copied information.
Telephone programming
telephone programming can be copied for Set Abilities in
the Capabilities section of Administration programming.
Use the
display button and the dial pad to identify the
source and destination of the copied information.
Capabilities
I n a d d i t i o n t o L i n e a b i l i t i e s a n d S e t a b i l i t i e s ,
C a p a b i l i t i e s
programming can be copied for:
Dialing filters
Remote access
COS passwords
Use the
display button and the dial pad to identify the
source and destination of the copied information.
Set Profile and Line
Set profile and Line Profile
Use
Profile and Line Profile to review the settings
programmed in Configuration and Administration programming.
Set Profile and Line Profile allow you to browse through, but not
change, the programmed settings.
Set Profile allows you to verify settings for each
telephone. Line Profile allows you to verify settings for each
e x t e r n a l l i n e .
Using Set Profile and Line Profile
As many as four people in the
system can use Set P&file
or Line Profile at the same time. You may access Set Profile
L i n e P r o f i l e w h i l e o n a c a l l a t y o u r t e l e p h o n e .
If someone is using Configuration or Administration
programmin , you can still access Set
and Line Profile
from anothe
telephone. The latest programming
changes can be seen as soon as they are made.
Set Profile and Line Profile can be used only from an
or
M 7 3 2 4 T e l e p h o n e .
A
Programming Overlay is not required to perform
P r o f i l e o r L i n e P r o f i l e .
