Norstar Modular DR5.1 System Coordinator Manual Download Page 21

Page: 21 / 131

Names

Line Names

Names allows you to assign a name to an external line. The

default name is the line number, for example,

with the display showing

speed dial.

2 .

3 .

4 .

5 .

6 .

7 .

Press

The display shows 2. Names.
Press

The display shows Set names.
Press

The display shows

Line names.

Press [Show].

The display shows Show

line:

Enter the line number from the dial pad.

Press

to program the name of line 001.

P r e s s

The name is removed from the display, and a cursor is

shown.
Enter the first character of the name by pressing the
appropriate dial pad button one, two, three, or four times. For

more information, see the section in this chapter entitled

Entering names.

Note:

Press

to restore the default name and go

to the next external line.

P r e s s

to move the cursor to the next position.

Continue

Modular

System Coordinator Guide

PO84264702

L 3

Time and date

Time and date

Time and date programming allows you to set the time and date

which i&shown on the display when a telephone is not in use. As

with any clock, this needs to be done every time that your office

has a power failure.

Changing the time and date is easy, but there are a couple of,

things to remember:

All times and dates must be entered using numerals. For

example, February would be entered as “2”.

The

may be entered in either 12 or

format. If the

display is in English, and the hour entered is less than

thirteen, the display prompts you to specify “am” or

The year is not shown on the telephone display, but make

sure that it is set correctly.

is programmed to allow

for leap years.

PO842647 02

Modular DR5.1 System Coordinator Guide

Summary of Contents for Modular DR5.1




































































































































Search results

Summary of Contents for Modular DR5.1

Reviews:

Related manuals for Modular DR5.1

Brands by name

Popular brands

Norstar Modular DR5.1, System Coordinator Manual

Search results

Summary of Contents for Modular DR5.1

Reviews:

Related manuals for Modular DR5.1

Brands by name

Popular brands