Redirect ring
The Redirect ring settihg causes a telephone to ring briefly (a
200 millisecond
a call is redirected on one of its
lines. Each
a ringing appearance of that line also
rings briefly for the redirected call if the Redirect ring setting for
them is
(the default). Use the
display button to select
the setting: Y (Yes) or N (No).
A user enters the Line Redirection feature code to redirect calls.
See the explanation of Line Redirection in the Telephone
Features chapter for
on redirecting lines.
Hotline
Hotline automatically calls a pre-assigned number when you lift
the receiver or press
at your telephone. Hotline has
three options:
None,
internal
(Intrnl),
and external
Internal
assigns an internal number.
External
assigns an external number. If you select an external
number, you can also select the line on which the call is made:
the Prime line, an external line, or
a
line pool. You will have to
specify the Line Pool Access code for a line pool.
Use the CHFINGE display button to select Hotline setting. you
select
use the button, the CHFINGE display
button, and the dial pad to program the internal number of the
telephone that Hotline calls are to be directed to.
If you select
use the
button,
display
button, and the dial pad to program the external telephone
number that Hotline calls are to be directed to, and to program
the line Hotline
be made on.
Programming hints
The telephone should be labeled to inform anyone using
Hbtline is active.
A telephone’s Prime line, line pool access codes, and access to a
line pool can be programmed by your Customer Service
representative.
Modular
System Coordinator Guide
PO64264702
51
Call
This feature lets you call from your
telephone and
interrupt calls or override Do Not Disturb on another
telephone. Use the
display button
select the setting:
N
Y (Yes).
hints
Apply this feature only to telephones from which such
interruptions can be justified.
Allow Last Number Redial
A
telephone’s ability to use Last Number Redial can be turned
on or off. Press CHFINGE to select the setting: N (No) or Y (Yes).
Allow Saved Number Redial
A
telephone’s ability to
Saved Number Redial can be
on or off. Press CHFINGE to select the setting: N (No) or Y (Yes).
Allow Link
The ability of a
to use Link (a host system signaling
option) can be turned on or off. Press
to select the
setting:
or Y (Yes).
Answer Timer
A
timer can be used to administer a delay between the last digit
you dial on a device connected to an analog terminal adaptor
and when the
or analog device is ready to receive
DTMF tone from the far end analog device. To change the
time, press CHRNGE to select the setting (in seconds):
timer: 3,
or 10.
hints
To
the device attached to the
you may want
to lengthen or shorten the delay. If a modem or fax machine
attached to the
you will want to keep the delay short. If a call
to a fax machine or modem cannot be connected, try shortening
the delay. If an individual is dialing the number for a fax machine
or’modem, you may want to make the delay a little longer.
PO642647 02
Modular DR5.1 System Coordinator Guide
