192 Using
remotely
Over a private network
You can access
remotely using a private network line.
1.
Select the private
line or the line pool that contains
network
2 .
Dial the number,
if any, needed to access the remote
system.
3.
If you hear a stuttered dial tone, enter a COS password.
4 .
Wait for system’dial tone.
Using
remotely
Once connected to a remote system you can do any one of the
.
enter the
DN followed by a COS password to change
your Class of Service.
.
dial the number of someone on the remote
system.
.
dial a line pool access code and make an external call.
.
enter a Page feature code (60 through 63). Use
instead
of
when entering the feature codes. See Page.
1
3
3
Using
remotely 93
Tones you may hear
.
Busy tone
T h e n u m b e r y o u d i a l e d
o n t h e
system
is busy. Your call will be
disconnected after five seconds,
system
dial
You may:
l
e n t e r t h e
DN followed by a COS
password to change your Class of
Service.
l
d i a l t h e n u m b e r o f s o m e o n e o n t h e
r e m o t e
system.
l
dial a line pool access code and make
an
external call.
Fast busy tone
l
e n t e r a P a g e f e a t u r e c o d e ( 6 0 t h r o u g h
63) using
i n s t e a d o f
S e e P a g e .
You have done one of the
l
entered an incorrect COS password.
Your call will be disconnected after
five seconds.
l
taken too long while entering a COS
password. Your
w i l l b e
disconnected after five seconds.
l
tried to
use
a line pool or feature not
permitted by your Class of Service.
You will hear system dial tone again
after five seconds.
Stuttered dial tone
l
dialed a number in the
system
which does not exist. Your call will be
disconnected after five seconds,
Enter your ‘COS password on the dial
p a d o f y o u r t e l e p h o n e .
DR6.1 System Coordinator Guide
PO64264702
PO64264702
Modular DR5.1 System Coordinator G’uide
. . . .
