manualshive.com logo in svg

Norsonic nor140, Instructional Manual

The Norsonic nor140 is a high-quality sound level meter designed for accurate noise measurement. The user manual for this product is available for free download at manualshive.com, providing step-by-step instructions and guidance on operating the device. Ensure optimal performance with the comprehensive and easily accessible manual.

Share
Download
background image

76

Chapter 15

Transfer of data to a PC

Mini D-sub

1

8

9

15

Pin-out of the cable Nor1441, the other end is standard RS232  
fitting directly into your pc.

Different options exist for transferring data from the 
instrument to a personal computer (PC). The instru-
ment may be connected to the PC by either a serial 
cable (RS232) or an USB-cable (USB). The quickest 
way however is to store the data on the SD-card and 
move the card to a PC for loading the data. Norsonic 
supply different programs for controlling the instru-
ment and analysis of the measured data. Contact your 
local Norsonic distributor for more information as the 
number of programs is steadily growing. 

For just reading the data stored in the instrument 

or on the SD-card, the program Nor1020 NorXfer is 
recommended. The program is included with the de-
livery of the sound level meter. The program transfers 
the data from the instrument to a format suitable for 
Windows. The data can be delivered as a text file or as 
an Excel workbook.

Included with the instrument is also a PC program 

– Virtual Instrument – which allows you to operate the 
sound level meter Nor140 from the PC and display a 

copy of the information on the instrument screen on the 
screen for the PC. Combined with a PC-projector this 
is ideal for demonstration and training. The connection 
to the PC can be by the serial interface or by USB.

The Nor140 is widely used for Noise Monitoring ap-

plications, both permanent and semi-permanent ap-
plications. Many of these applications is controlled by 
NorMonit, a program that controls the entire measure-
ment process, by collecting data from one to many 
Nor140, weather stations etc. NorMonit together with 
NorReview forms a complete data management and 
reporting system for Noise monitoring. This applica-
tion often requires wireless access to the instrument or 
communication via an IP network. Consult your local 
Norsonic representative for information about how to 
setup and configure a noise monitoring system using 
the Nor140. 

Transfer of data to a PC

Summary of Contents for nor140





























































































































































































































Reviews:

No comments

Related manuals for nor140

Oceanic EOS Service Procedure preview
EOS
Brand: Oceanic Pages: 17
HANYOUNGNUX HP3 Instruction Manual preview
HP3
Brand: HANYOUNGNUX Pages: 4
Oceanic ATOM Operating Manual preview
ATOM
Brand: Oceanic Pages: 152
Kaiterra Sensedge Mini Troubleshooting Manual preview
Sensedge Mini
Brand: Kaiterra Pages: 8
Kaiterra Sensedge Manual preview
Sensedge
Brand: Kaiterra Pages: 12
National Instruments PXIe-5665 Calibration Manual preview
PXIe-5665
Brand: National Instruments Pages: 85
National Instruments PXIe-5622 Getting Started Manual preview
PXIe-5622
Brand: National Instruments Pages: 12
National Instruments PXIe-4163 Manual preview
PXIe-4163
Brand: National Instruments Pages: 18
National Instruments USB-5683 Getting Started Manual preview
USB-5683
Brand: National Instruments Pages: 12
Zeversolar ComBox Installation And Operating Instructions Manual preview
ComBox
Brand: Zeversolar Pages: 35
Zenner zelsius C5-ISF Installation And Operating Instructions Manual preview
zelsius C5-ISF
Brand: Zenner Pages: 52
DAKOTA ULTRASONICS ZX-3 Operation Manual preview
ZX-3
Brand: DAKOTA ULTRASONICS Pages: 38
ABQ Industrial Dakota Ultrasonics ZX-2 Instruction Manual preview
Dakota Ultrasonics ZX-2
Brand: ABQ Industrial Pages: 27
SecureAlert, Inc. ReliAlert Operation Manual preview
ReliAlert
Brand: SecureAlert, Inc. Pages: 7
GANN 30001430 Operating Instructions Manual preview
30001430
Brand: GANN Pages: 89
LEGRAND LG-41492 Quick Start Manual preview
LG-41492
Brand: LEGRAND Pages: 5
Kawai Digital Piano CA750 Owner'S Manual preview
Digital Piano CA750
Brand: Kawai Pages: 76
Teledyne Lecroy BPA Quick Start Manual preview
BPA
Brand: Teledyne Lecroy Pages: 3

Brands by name

Popular brands

Load more brands