Nordson VersaBlue VA, Manual

Page: 145 / 272

Operation
4‐83
P/N 213828_11
2014 Nordson Corporation
VersaBlue_PPA
6. Guide free end of EtherNet cable through the casing plate.
Connect the EtherNet cable to the control panel (7). If necessary, refer to
section
Repair, Detaching Control Panel .
7. Screw the two halves of the socket casing together again, put into place
on the casing plate and secure with clamps.
8. Close the electrical cabinet.
9. Connect the other end of the EtherNet cable to the PC.
CAUTION: Lay the cable outside of the melter such that there is no risk of
stumbling over it.
10. Switch on the melter again.
11. Call up melter (VersaWeb)
NOTE: On the Product Resource CD there is a programming example
MultiVersaWeb , how to call up up to six melters in one browser window..
Calling up Melter (VersaWeb)
On the PC
1. Call up the melter in the browser with the configured address, for
example http://192.168.0.99/.
2. Touch the button VersaWeb .
The web server is protected. Refer to Appendix A of this manual for the
user name and keyword to log on.
3. Skip Password input in the next window by touching OK. Then the current
control panel screen is displayed.
ATTENTION: Operation via the Webserver and operation via the control
panel are not mutually exclusive.