Nordson VersaBlue VA, Manual

Page: 116 / 272

Level 2 (parameters, settings by trained
personnel)
Level 3 (basic settings)
Level 1 (normal operation for all operators)
Fig. 4‐63
V18
Select
security level
High
Medium
Low
No password
protection
Fig. 4‐64
V19
Operation 4‐54
P/N 213828_11
2014 Nordson Corporation
VersaBlue_PPA
Melter
(contd.)
Password Setup (Also Refer to Appendix A)
Assigning New Password, e.g. for Level 1
Level 1 (normal operation for all operators)
Touch key. An input window appears in which the
new password must be entered and confirmed (repeated).
NOTE: The passwords must be different for each level and must be at least
one character long and no longer than 16 characters.
NOTE: Every security level also applies to the lower ones. Example: The
password for level 2 also grants access to the features of level 1.
When the passwords have been assigned, a security level must be selected.
Refer to
Select Security Level.
Selecting Security Level
High: Password protection is switched on for all three levels.
Medium: Password protection is switched on for level 2 and 3.
Low: Password protection is switched on only for level 3.
No password protection: Password protection is switched off for all three
levels.
No password protection
Password protection (selected security level) is automatically activated if the
screen is not touched for 10 minutes. Then the password prompt appears
again for password-protected features.
The password protection (selected security level) is active as soon as this
key is touched.