System Settings
Shift Schedule
OLED User Interface
80
Part 1128351_02
E
2020
Nordson Corporation
Setting Up Shift Schedules
Use Shifts to sort and filter production data reports based on a day and more
specifically, the hours of production. You can define up to 5 shifts per day.
Refer to Reports for more information.
1. Press the
on the Navigation pad to
Enable
Shift Schedule.
2. Select
Add 1
st
shift,
press
>
then
do the following:
S
Press
to select which day or days of the week you want to set up a
heat schedule. When done, press the Down key to the bottom of the
list and select
Done
.
S
Select
Beginning,
then press
>
,
and enter the time you want the
Master Heater control to switch On. For 12-hour clock, use the
Up/Down key to toggle between AM and PM. Press
to continue.
S
Select
Ending,
then press
>
,
and enter the time you want the Master
Heater control to switch Off. For 12-hour clock, use the Up/Down key
to toggle between AM and PM. Press
3. select
Done.
Press
<
two times to return to the Shift Schedule menu.
4. Press
to return to the
Home
screen.
NOTES:
S
You can have a maximum of 5 shifts.
S
Shift schedules cannot overlap each other.
S
If you remove a Shift schedule, then all shift settings (day or days of week
as well as Beginning/Ending times) are automatically deleted.
S
Heat or Setback Events cannot cross into the next day.
Summary of Contents for ProBlue Flex
Page 73: ...OLED User Interface 67 Part 1128351_02 E 2020 Nordson Corporation Figure 3 ATS PCA Board...
Page 129: ......
Page 130: ......
