System Settings
Level Sensing Settings
Lid Open Alert
Lid Open Alert Time
OLED User Interface
47
Part 1128351_02
E
2020
Nordson Corporation
Enabling/Disabling Lid Open Alerts and Settings
An optional lid switch (part number 1128173) is required for the Lid Alert.
NOTE:
A lid switch is standard for Melt-on-Demand systems.
Use the Lid Alert option to receive system alert pop-up message when the lid
is left open for too long.
1. Press the
on the Navigation pad to toggle
Lid Open Alert
to Enabled
or Disabled. The default is Enabled.
2. Select
Lid Open Alert Time
, press
>
, and enter the number of minutes
you want the lid to be opened before the melter enters into an Alert
condition. The default is 2 minutes, the minimum is 1 minute, and the
maximum is 10 minutes. When done press the
on the Navigation pad
to accept changes.
3. Press
to return to the
Home
screen, or press
<
to return to the
System Settings
menu.
NOTE:
S
Press
on the OLED panel to clear and reset any Alert, Fault, or
Stop condition.
Summary of Contents for ProBlue Flex
Page 73: ...OLED User Interface 67 Part 1128351_02 E 2020 Nordson Corporation Figure 3 ATS PCA Board...
Page 129: ......
Page 130: ......
