OLED User Interface
4
Part 1128351_02
E
2020
Nordson Corporation
Instructions and Safety Messages
S
Read and follow the instructions provided in this document and other
referenced documents.
S
Familiarize yourself with the location and meaning of the safety warning
labels and tags affixed to the equipment. Refer to
Safety Labels
and Tags
at the end of this section.
S
If you are unsure of how to use the equipment, contact your Nordson
representative for assistance.
Installation Practices
S
Install the equipment in accordance with the instructions provided in this
document and in the documentation provided with auxiliary devices.
S
Ensure that the equipment is rated for the environment in which it will be
used. This equipment has not been certified for compliance with the
ATEX directive nor as nonincendive and should not be installed in
potentially explosive environments.
S
Ensure that the processing characteristics of the material will not create a
hazardous environment. Refer to the Safety Data Sheet (SDS) for the
material.
S
If the required installation configuration does not match the installation
instructions, contact your Nordson representative for assistance.
S
Position the equipment for safe operation. Observe the requirements for
clearance between the equipment and other objects.
S
Install lockable power disconnects to isolate the equipment and all
independently powered auxiliary devices from their power sources.
S
Properly ground all equipment. Contact your local building code
enforcement agency for specific requirements.
S
Ensure that fuses of the correct type and rating are installed in fused
equipment.
S
Contact the authority having jurisdiction to determine the requirement for
installation permits or inspections.
Operating Practices
S
Familiarize yourself with the location and operation of all safety devices
and indicators.
S
Confirm that the equipment, including all safety devices (guards,
interlocks, etc.), is in good working order and that the required
environmental conditions exist.
S
Use the personal protective equipment (PPE) specified for each task.
Refer to
Equipment Safety Information
or the material manufacturer's
instructions and SDS for PPE requirements.
S
Do not use equipment that is malfunctioning or shows signs of a potential
malfunction.
Summary of Contents for ProBlue Flex
Page 73: ...OLED User Interface 67 Part 1128351_02 E 2020 Nordson Corporation Figure 3 ATS PCA Board...
Page 129: ......
Page 130: ......
