1
．
Inspection
12
No.704-2010-01
Loosen the 4 panel fasteners on the inlet
shaft on both the left and right sides with a
Phillips screw driver (No.2) and open the
door to the right.
Remove the 3 screws that fix the sample
inlet.
Remove the sample heating tube.
Remove the 3 flat head screws on the
sample inlet and slowly turn sample heating
tube and mercury collecting tube to pull
them out.
Unscrew 3 screws with a hex wrench and
pull out the sample heating tube. Also
remove the box nuts of the Teflon joint.
