1
．
Inspection
42
No.704-2010-01
⑤
Put back the step by clicking >
of the BC-ADJUST, and make the lift up once again
after putting the Boat handling poker back to the origin (to this side).
⑥
Put back the step by clicking <<
of the BC-ADJUST, and click > while the boat is
set to proceed with the step. Verify that the Boat handling poker does not touch
to the lift and the boat sits on the pole to a nicety.
3.6.
Adjustment of sample changer (Vertical axis, Y-axis)
Following malfunctions are supposed to take place as abnormality.
i
To hear abnormal noise
ii
Fail to catch tray
iii
Stop in the midst of operation
Following countermeasures are expected to be taken.
・
Grease up
・
Adjustment under the maintenance mode
・
Adjustment by the plate for setting the position
・
Case of the bent transportation arm
・
Replacement or adjustment of axis
・
Way of grease up
Wipe off old grease on the part of broken line shown below, and then apply the grease
(VADEN grease) supplied with the instrument.
Version I
Version II
